VERSIRAK … 3U subracks

/VERSIRAK … 3U subracks
VERSIRAK … 3U subracks 2018-03-21T12:51:42+00:00

CONNECTOR MOUNTING OPTIONS
Versirak is designed for use with DIN41612 type connectors and motherboard/backplane mounting. Three types of subrack are available: TYPE 1 to accept DIN connectors directly; TYPE 2 to accept Motherboards; TYPE 3 which accepts both DIN connectors via add-on rails and Motherboards. This version can be fully upgraded for EMC if required.

PCB SIZES FOR 3U SUBRACKS
3U subracks accept 100 mm Eurocards vertically and double height 233,34mm Eurocards horizontally using the horizontal card mounting kit. 112mm PCBs can be fitted vertically using the low profile guide rail. Please note that where EMC is required TYPE 3 subracks will only accept PCBs shorter than the overall subrack depth.

Ref
Description
Qty
1
Sideplate
2
2
T-Front Plate
2
3
Front Horizontal Rail
2
4
Connector Mounting Rail
2
Screws M5 x 12mm, Pan Hd
8
Supplied in kit form, comprising of:
Ref
Description
Qty type1
Qty type 2
1
Sideplate
2
2
2
T-Front Plate
2
2
2.1
Closing Angle
2
2.2
Infill panel 3U
2
3
Front Panel
2
4
7
Rear Horizontal Rail
2
2
Screws M5
8
12

SHOCK AND VIBRATION TESTING

Versirak has been tested to IEC 571-1, which was applied to a standard 6U full width subrack which was fitted with EMC vented covers, front and rear panels and an evenly distributed internal load of 2.5 Kg . Frequency range 2,5 – 100Hz up to 1 gn . Sustained vibration for 15 minutes per axis at 1 gn . The unit was than subjected to further conditioning for 2 min per axis at 3 gn at a frequency of 50 Hz. Tests were carried out with and without top/bottom covers fitted, full test results are available on request .

HEAT DISSIPATION
To assist the system designer achieve optimum results with EMC and thermal performance, heat dissipation tests have been carried out on Versirak. The tests include dissipating up to 200W with the subrack fitted with solid cover, vented cover and without a cover .Full test results are available on request .

3U x 42HP & 84HP Type 1 DIN 41612
* Indicates alternative positions

3U x 42HP & 84HP Type 2 & Type 3 MOTHERBOARD
* Indicates alternative positions

ORDER CODES 3U SUBRACKS

Width
Subrack type
PCB depth = 160
D = 170
d = 172.3
PCB depth = 220
D = 230
d = 232.3
PCB depth = 280
D = 290
d = 292.3
PCB depth = 340
D = 350
d = 352.3
84HP
Type 1
97377H
97247G
97249D
97251M
Type 2
97378R
97248F
97250B
97252E
Type 3
97395E
97396C
97397A
42HP
Type 1
97379G
97380F
97381D
97382B
Type 2
97383M
97384E
97385C
97386A
Type 3
CONFIGURE FROM PIECE PARTS

This Is A Custom Widget

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.

This Is A Custom Widget

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.